Top 10 Tips for Memory Card Maintenance

A good guide for you to protect well on your own card~~~
visit HERE

Great tips, thanks for sharing Max. I think it is best you copy the information in here and then link the source. My 2 cents as per discussion in our meetings .

thanks max for sharing, let me do you a favor to cut and paste:

Jeff Cable, professional photographer for Lexar Media, shares his top 10 tips for looking after your memory cards.

Memory cards are a key component for every level of digital photographer, from novices all the way up to professionals.

However, memory cards only remain effective image storage devices so long as they're maintained correctly.

Taking good care of memory cards and remembering a few easy tips to maintain them well will help ensure that images are protected.

Here are my top 10 tips...

1. Format the card in your camera

Before you start taking photos, format your memory card in the camera you'll be using.

This is better than formatting it in your computer as the formatting of the card will align itself automatically with your camera, ensuring that the card works properly.

2. Acknowledge your capacity

Make sure you pay attention to the image counter as it ticks down available images. Pictures could become corrupted if you try to use a full memory card.

3. Remember you can use recovery software

If you have formatted your card in the camera or deleted an image by mistake, don't panic, your images may not be lost. Using recovery software, such as Lexar® Image Rescue® 4, gives you the ability to try to retrieve lost images.

If you accidentally format the card incorrectly in your camera, do not continue shooting with that card. Instead, remove the card from the camera and run your recovery software on it to retrieve the images. If you continue shooting with the card, the images that you capture will override the images already on the card.

4. Rotate cards in and out of use

If you're using multiple memory cards on a shoot, as many professional photographers do, develop a system for knowing which cards have been used and which cards are empty.

For instance, if using a card wallet, place the used cards in upside-down and the empty available cards right-side up. This will ensure you don't accidentally use a full card and corrupt existing images, as well as get even use out of them.

5. Use a card reader
It's best not to connect the camera to the computer via a USB cable, as this drains your camera battery.

Also, if the USB cable is accidentally disconnected, it will interrupt image transfer and possibly corrupt images.

Instead, use a card reader, which is a much faster, safer, and more efficient method. The Lexar® Professional ExpressCard™ reader, for example, offers high-speed file transfer - up to 133MB/s.

6. Try to not delete images on your camera

If there's an image you don't like, don't delete it on the camera. Choose a high-capacity memory card, which allows you to shoot uninterrupted for longer so you don't need to spend time clearing space during shooting.

It's more efficient to wait until you have downloaded your images to your computer, so you can have the operating system handle the deletion rather than the camera.

7. Don't remove the card from the camera too early

When you are ready to transfer your images from your card to the computer, always wait until the red light indicating image transfer has turned off before removing the memory card from your camera.

8. Don't panic

If your card gets wet, don't panic. Since Lexar memory cards are all made of solid state memory with no moving parts, they are incredibly durable. If your card gets wet just ensure you dry it out before you put it back into any electric equipment.

9. Backup first

Any time you have taken images that are very important to you, or you have taken photographs for a paying client, make sure to keep the images on your memory card until you have backed up the images.

For the most peace of mind, you should back up to multiple hard drives on your computer and preferably have you backups in multiple locations.

10. Label your cards

Label your memory cards with your name and phone number so that, if you misplace it, there is a better chance you might get it back.

If you want to find out more about card care, you can watch my video here.

[source: http://www.photographyblog.com/articles/top_10_tips_for_memory_card_maintenance/2]

Thank you CJ for your effort

Thanks for putting up this topic Max...

thanks CY,Simon~~ and CJ for helping me~~ hahaa

this is a useful article but den i promote Lexar at sa same time...haha

Thanx max

very good sharing. thanks

Avex wrote:this is a useful article but den i promote Lexar at sa same time...haha

Thanx max

Mainly because the guide was done by Lexar~ LOL.

nice article... thanks for sharing..